IAP-6002-WG/WG+ is a reliable 802.11b/g WLAN with 2 ports LAN Access Point. It can be configured to operate in AP/ Bridge/Repeater/AP-Client mode. You are able to configure IAP-6002-WG/WG+ by WEB interface via LAN port or WLAN interface. IAP-6002-WG/WG+ provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IAP-6002-WG+ also provides PD feature on ETH2 which is fully compliant with IEEE802.3af P.O.E. PD specifi cation. Therefore, IAP-6002-WG/WG+ are one of the best communication solutions for wireless applications on the industrial network.
产品特征
•
WLAN interface support up to 54Mbps link speed
•
Various kinds of operation modes supported: AP/Bridge/ Repeater/AP-Client mode
•
Various kinds of encryption supported: WEP/WPA/WPAPSK(TKIP,AES)/WPA2/ WPA2-PSK(TKIP,AES)/Radius
•
Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
•
Ethernet switch mode enable Daisy Chain
•
Wireless connecting status monitoring
•
Versatile modes & event alarm by e-mail
•
HTTPs protocol supported for secured management
•
IP table to prevent access from unauthorized IP address
•
IP Confi gurable by Windows utility (AP-Tool)
•
1KV isolation for PoE PD port of IAP-6002-WG+
•
Dual redundant DC power inputs of terminal block
•
Rigid IP-30 housing design
•
DIN-Rail and panel mounting enabled
Physical Ports
IAP-6002-WG
IAP-6002-WG+
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
2
P.O.E. PD port
Present at ETH2 Fully compliant with IEEE 802.3af Power Device specifi cation Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min